Two recalls this morning on Delta cribs, covering 1.6 million cribs:

FOR IMMEDIATE RELEASE
October 21, 2008
Release #09-017

Delta's Recall Hotline: (800) 816-5304
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908

Infant Death Prompts Recall to Repair 985,000 Delta Enterprise Drop Side Cribs; Missing Safety Pegs Can Cause Entrapment and Suffocation Hazards

WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission (CPSC), in cooperation with Delta Enterprise Corp., of New York, New York., is announcing the voluntary recall to replace missing safety pegs involving 985,000 drop side cribs. Failure to use or install safety pegs can cause an entrapment and suffocation risk to infants and toddlers.

When the safety pegs in the base of each leg of the crib are missing from the lower track, the crib locks can disengage and detach if lowered below the peg hole, creating a hazardous gap. This gap can lead to the entrapment and suffocation of an infant or toddler.

CPSC staff is aware of a death of an 8-month-old child who became entrapped and suffocated when the drop side of the crib detached in a reassembled crib where the safety pegs were not installed. CPSC is also aware of two entrapments and nine disengagement incidents in cribs where the safety pegs were missing.

The recall involves all Delta cribs manufactured in Taiwan or Indonesia, with the “Crib Trigger Lock with Safety Peg” drop side hardware design. These model numbers and country of origin can be located on the mattress support board label: 4320, 4340, 4500, 4520, 4530, 4532, 4540, 4542, 4550, 4551, 4580, 4600, 4620, 4624 (production dates 01/06 thru 11/07), 4640, 4660, 4720, 4735, 4742, 4750 (production dates 01/95 thru 12/00), 4760, 4770, 4780, 4790, 4820, 4840, 4850, 4860, 4880, 4890, 4892, 4900, 4910, 4920, 4925-2, 4925-6, 4930, 4940, 4943, 4944, 4947, 4948, 4949, 4950, 4958, 4963, 4968, 4969, 4980.

The recalled cribs have date codes ranging from 1995 though December 2005 and one model (4624) was made in 2007. The model numbers are located on the top of the mattress support board.

The cribs, which were made in Taiwan and Indonesia, were sold at major retailers, including Walmart, Kmart and Target.com from January 1995 through September 2007 for about $100. These cribs have also been found to be sold secondhand. Cribs currently sold at retail are not involved.

CPSC and Delta urge parents and caregivers to immediately stop using cribs that are missing a safety peg on any leg of the crib and contact Delta to receive a free, easy-to-install repair kit. The kit will include safety pegs in a bold color and warning labels to be affixed to the mattress board. Consumers with cribs that have all safety pegs installed may continue to use the cribs; however, CPSC recommends that these consumers contact Delta for the repair kit for future assembly purposes. Call Delta toll-free at (1-800-816-5304) anytime after 5pm today or log on www.cribrecallcenter.com to order the free replacement kit.

Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child if their recalled crib is missing safety pegs.

CPSC would like to remind parents not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop side crib parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap and entrap a child. In addition, do not try to repair any side of the crib, especially with tape, wire or rope.

FOR IMMEDIATE RELEASE
October 21, 2008
Release #09-016

Delta's Recall Hotline: (800) 816-5304
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908

Infant Death Prompts Recall To Repair 600,000 Drop Side Cribs By Delta Enterprise; Spring Peg Failure Can Cause Entrapment and Suffocation Hazards

WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission (CPSC), in cooperation with Delta Enterprise Corp., of New York, N.Y., is announcing the voluntary recall today of about 600,000 drop side cribs. The crib’s drop side can detach when the spring peg is not engaged, which can cause an entrapment and suffocation risk to infants and toddlers.

If the spring pegs in the base of each leg of the crib are pushed back into the lower track, the pegs can become nonfunctional. This can cause the drop side to detach from the crib and create a gap that can entrap an infant or toddler.

CPSC staff is aware of a death of an 8-month-old child who suffocated when the drop side of his crib detached. CPSC is also aware of one child entrapment and one incident in which the drop side detached due to a disengaged spring peg.

The recall involves all Delta drop side cribs manufactured prior to 2006 that use “Crib Trigger Lock with Spring Peg” drop side hardware design. The recalled model numbers and country of origin include: 4340, 4343, 4520, 4600, 4620, 4624, 4625, 4629, 4660, 4665, 4720, 4750, 4751, 4850, 4855, 4857, 4880, 4920, 4925-2, 4925-2B, 4925-6, 4980, and 8605. The model number, country of origin and manufacture dates are located on top of the mattress support board. The recalled cribs have Delta’s name and address on the mattress support boards and Delta’s logo on the teether rail.

The cribs, which were made in China, were sold at major retailers nationwide from January 2000 through January 2007 for between $33 and $200. Cribs currently sold at retail are not involved.

CPSC and Delta urge parents and caregivers to immediately stop using these cribs and contact Delta to receive a free, easy-to-install repair kit. Call Delta toll-free at (800) 816-5304 anytime after 5 pm today or log on www.cribrecallcenter.com to order the free repair kit.

Parents and caregivers are encouraged to find a safe, alternative sleep environment for their child until the repair kit, with new safety pegs, is safely installed are the recalled cribs.

CPSC would like to remind parents not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop side crib parents should check to make sure the drop side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap and entrap a child. In addition, do not try to repair any side of the crib, especially with tape, wire or rope.